DBI Plastics

Engineering

 
 
 

Quick Connector Plugs (DS)

The length of the plug ensures tight internal closure not only while transportation but during pressure tests as well. The flange protects the external surface, and makes the plug easy to remove. Available are two versions: with and without horizontal handle, to match packaging and ergonomics. Some plugs meet the requirements of SAE J2044 standard (the diameter dimension is therefore not that of the plug itself but of the nominal size of the fitting pipe)

 
DBI REF
 
DS0064A  6.4  25.3  17.5  10.0 
DS0078A  7.8  25.2  23.0  10.0 
DS0080A  8.0  25.3  23.0  10.0 
DS0095A  9.5  25.8  24.8  10.0 
DS0095B  9.5  26.8  24.8  10.0 
DS0095C  9.4  25.8  20.5  10.0 
DS0100A  10.0  27.0  24.8  10.0 
DS0118A  11.8  29.2  25.0  10.0 
DS0126A  12.6  39.2  25.0  10.0 
DS0150A  15.0  34.5  34.0  10.0 
DS0159A  15.6  34.1  33.8  10.0 
DS0160A  16.0  36.1  34.9  10.0 
DS0180A  17.9  34.0  10.0 
 
 
 
Material solutions

The materials we use in our solutions fulfil the most demanding requirements. From the softest plastic for great ergonomics, to the hardest technical thermoplastics combined with Elastomers for when extreme tightness is a necessity.